Description: This material is slightly harder than Aflas 360. Nevertheless, it exhibits comparable properties. All specific information can be found in the datasheet.
Description: Aflas is characterized by extreme heat resistance and chemical compatibility. This material should be preferred over FPM in the following cases:
– 100% Methanol
– Steam up to 160°C (special grades up to 200°C)
– Bases and amines
Description: This material was specifically developed for use in the food industry. The development was based on and complies with the requirements of EU Regulation No 1935/2004 and EU Regulation No 2023/2006.
Description: DMH FPM357 is distinguished by its good flexibility at low hardness. Due to its low compression set and reduced hardness, this material is particularly suitable for sealing elements in low-pressure applications. FPM357 can be used in temperatures ranging from -20°C to +210°C.
Description: This material has similar properties to FPM 350. Additionally, it is approved according to NORSOK M-710 for applications with rapid pressure drops.
Description: This black FPM material is somewhat harder than our brown FPM 350. It can be used briefly in hot air up to 280°C and has good resistance against a wide range of chemicals.
Description: This material is similar to our brown FPM. However, it differs from DMH FPM 350 by having a slightly softer hardness level. It is FDA CFR 21.177.2600 compliant and meets the 3A Sanitary Standard 18-03. Therefore, its main application area is the food industry.
Description: FPM offers good chemical resistance and is suitable for high temperatures, but it loses elasticity at moderately low temperatures. FPM can be used in a temperature range from -20°C to 220°C. Typical applications: lip seals, seals for offshore applications, direct contact with fuel, high-speed rotary seals, and applications at 200°C.
The ROLF WEBER GROUP occasionally uses images on this website that have been generated or substantially modified using artificial intelligence (AI).
Images marked accordingly may contain fictional elements and may not accurately depict real people, places, products or situations in every detail. They are used for visual design and to illustrate our content.
Where required by law, AI-generated or AI-modified content is labelled in accordance with Article 50 of Regulation (EU) 2024/1689 (EU AI Act).
The ROLF WEBER GROUP remains responsible for the content published on this website.
Privacy Settings